HP XP P9000 Command View Advanced Edition Software - Manual (Page 151)

If using a copy type, a remote path is set.
If selecting an LU, it must not be associated with a device group.
• LDEVs that are managed by RAID Manager and LDEVs that are managed by HP StorageWorks
P9000 for Business Continuity Manager Software do not coexist.
NOTE:
Creating copy pairs using LUSE volumes and Fast Snap and snapshot group pairs not supported
Mainframe
• The disk configuration definition file for the volumes to be used as the P-VOL and S-VOL of the
copy pair has been created using Replication Manager or from a volume scan by HP StorageWorks
P9000 for Business Continuity Manager Software.
• The created disk configuration definition file is stored under the same prefix on the same host.
• Datasets for storing a copy group definition file have been allocated under the same prefix.
• The versions of all instances of BCM registered as information sources in are 6.3 or later.
Storage system conditions for pair configuration definition
The following tables describe the correspondence between the copy types that can be specified for
copy pair configuration definitions and the storage system type.
Supported combinations of local copy types and storage systems
S-VOL
P-VOL
XP24000/XP20000 XP12000/XP10000/SVS200 P9500 XP7
-- -- -- BC, SS/FS VSP G1000
-- -- BC, SS/FS -- P9500
-- BC, FS -- -- XP12000/XP10000/SVS200
BC, FS -- -- -- XP24000/XP20000
NOTE:
If you define a mainframe system copy pair using RAID Manager, you cannot specify the copy type
of the local copy.
Legend:
--: Not applicable
BC: Business Copy
FS: Fast Snap
SS/FS: Snapshot/SnapShot
User Guide 151