HP XP P9000 Command View Advanced Edition Software User Manual
Page 209
Remarks
Default
value
Specifiable val-
ues
Item specified
Options
Pair com-
mand
When specified: YKRECVER.
When not specified: YKDELETE.
The command cannot be used during a
planned shutdown (during switching of
the P-VOL and S-VOL).
Note: The Force Delete option changes
the status of the secondary volume to
simplex, but does not affect the status of
the primary volume.
off
on, off
Whether to set the
pair status to Sim-
plex from the S-
VOL.
force
delete
Copy type: Cnt Ac-A/Cnt Ac-J
Remarks
Default
value
Specifiable val-
ues
Item specified
Options
Pair com-
mand
Forward: The SUSPOP status is set so that the
copy direction after re-synchronization is from
the primary site to the secondary site.
Reverse: The SUSPOP status is set so that the
copy direction after re-synchronization is from
the secondary site to the primary site.
Notes:
•
This option cannot be specified if the oper-
ation target is a copy pair or a C/T Group.
This option can be specified when the op-
eration target is a copy group.
•
Either the Direction option or the Synchron-
ization option needs to be specified for the
split command. (Both options cannot be
specified at the same time.)
Blank
Forward, Re-
verse
The copy direc-
tion of the pair
when re-synchron-
ization is per-
formed.
Direction
split
User Guide
209