HP XP P9500 Storage User Manual
Page 86
Description
Error code
(SSB2)
The Paircreate operation cannot run because the S-VOL LUN of S-VOL is a LUSE volume created across
multiple CLPRs.
CBD1
The storage system is in internal processing. Try the operation again.
CBD7
A pair cannot be created because the specified primary volume is one of the following:
CBD8
•
A journal volume used for Cnt Ac-J.
•
A Cnt Ac-J secondary volume that is in a status other than Suspend.
The Paircreate operation cannot run because the used capacity of the Data Retention on the secondary
system exceeds the license capacity.
CBDA
A request for a Paircreate operation was received in the Cnt Ac-S-Cnt Ac-J combination status. However,
the command was rejected because the Mirror ID of Cnt Ac-J was 0.
CBDC
In configuring a Cnt Ac-S-Cnt Ac-J multi-target configuration, a request for a Cnt Ac-S Paircreate operation
was rejected because the Cnt Ac-J pair was in the process of copying.
CBDD
The Paircreate operation cannot run because the P-VOL is used by Fast Snap or Snapshot.
CBDE
The Paircreate operation cannot run because the S-VOL is used by Fast Snap or Snapshot.
CBDF
The Paircreate operation cannot run because the P-VOL is a Fast Snap or Snapshot virtual volume.
CBE0
The Paircreate operation cannot run because the S-VOL is a Fast Snap or Snapshot virtual volume.
CBE1
The Paircreate operation cannot run because the P-VOL is a Thin Provisioning, Fast Snap, or Snapshot
Pool-VOL.
CBE2
The Paircreate operation cannot run because the S-VOL is a Thin Provisioning, Fast Snap, or Snapshot
Pool-VOL.
CBE3
More than 32,768 pairs cannot be created in one storage system.
CBE7
The pair cannot be created because the specified P-VOL is being shredded by Volume Shredder.
CBEB
The pair cannot be created because the specified S-VOL is being shredded by Volume Shredder.
CBEC
The Paircreate operation cannot run because of one of the following reasons:
CBED
•
The specified S-VOL is the volume for a Cnt Ac-J S-VOL.
•
The specified S-VOL is the volume for a Cnt Ac-J journal volume.
•
An attempt was made to create the 2DC or 3DC configuration using the specified S-VOL, but a storage
system that does not support the 2DC or 3DC configuration is included.
The request for a Paircreate was rejected because the specified P-VOL is part of a Cnt Ac-J pair for delta
resync, or is the P-VOL in a 3 Cnt Ac-J DC multi-target configuration.
CBEE
The Paircreate operation cannot run because the P-VOL is used as an external volume mapped for online
data migration.
CBF3
The Paircreate operation cannot run because the S-VOL is used as an external volume mapped for online
data migration.
CBF4
An attempt was made to create the 2DC or 3DC configuration using the specified P-VOL, but the Paircreate
operation cannot run because one of the storage systems does not support the 2DC or 3DC configuration.
CBF7
The pair cannot be created because the model or the microcode version of the primary or secondary system
is not supported.
CBF9
86
Troubleshooting