HP XP P9500 Storage - Manual (Page 110)

Description Item
Paths on this system. List
•
No. The paths are listed in numbered order.
•
Path Status. The path’s condition. See “Logical path status definitions” (page 68) for
definitions.
• MCU Port. Port number of the MCU.
•
RCU Port. Port number of the RCU.
Serial number of the RCU. The LDKC number displays in parentheses to the right of the RCU
S/N. RCU S/N
Controller ID and model name. Controller ID
Path group ID entered at RCU registration. Used to identify groups of logical paths. Path Gr. ID
SSIDs of the RCU. SSID
CU number of the RCU. When you select CU Free, “Any” displays. RCU CU No.
Type of path. MCU-RCU Path
Minimum number of MCU-RCU paths for the selected RCU. Minimum Paths
Time value for the remote I/O (RIO) missing interrupt handler (MIH), which is the wait time
for data transfer from the primary to secondary storage system is complete. RIO MIH Time
Date and time when the RCU was added. RCU Registered
Date and time when the RCU was last updated. Last Update Time
Time limit for data to travel from P-VOL to S-VOL. Round Trip Time
To refresh the RCU Operation window after closing the RCU Status dialog box, click the
check box. By default, the check box is not selected. Check box, “Refresh the
RCU Operation window
110 GUI reference