HP XP P9500 Storage - Manual (Page 107)

When LDKC, a CU group, or CU is selected in tree
The following columns display in the list area when MCU&RCU is selected in Display, and an
LDKC, CU group, or CU is selected in the tree.
Description Item
CU number selected on the tree. If you select CU Free, “Any” displays. CU
Displays whether the paired storage system is the RCU or MCU. If you accessed a primary
system, the MCU, then Type displays “RCU”. If you accessed a secondary system, the RCU,
then Type displays “MCU”. Type
Serial number of the paired CU (five digits). The LDKC number (two digits) displays next to
the S/N. S/N
ID of the paired CU. ID
• If your tree selection is from CU Free, the path group ID displays, either as Default or an
asterisk (*) and two-digit hexadecimal number.
•
If your tree selection is from a CU (not CU Free), the SSID displays a four-digit hexadecimal
number.
CU number of the paired CU. If you select CU Free, “Any” displays. Paired CU
Path channel type (fibre) between the CU in the local storage system and paired CU. This
column is blank when the local CU is an MCU. M-R Path
Status •
Normal indicates no path failure to the RCU.
•
Failed indicates a failure in all paths to the RCUs.
• Warning indicates that a failed path to the RCU exists.
•
The field is empty when the local CU is an MCU.
Number of paths (blank when the connected CU is an MCU). Num. of Path
When an MCU or RCU is selected in tree
The following columns display in the list area when MCU&RCU is selected in Display, and an MCU
or an RCU is selected in the tree.
Description Item
SSID or path Item
SSID of the paired CU or Path group ID ID
Path channel type (fibre) between MCU and RCU (blank when the target CU is the MCU) M-R Path
Status of the path Status
Port number on the MCU MCU Port
Port number on the RCU RCU Port
RCU Operation window 107