HP XP P9500 Storage - Manual (Page 61)

3. In the tree, select the port, host group, CU, or the CU grouping where the pair is located.
4. In the list, select the pair volume that you want to release, right-click, and then select Pairsplit-S
from the menu. The Pairsplit-S dialog box displays.
5. From the Delete Pair by Force list, select one of the following:
•
Yes, to forcibly delete the pair or pairs, even when the primary system is unable to
communicate with the secondary system. Specifying Force allows host operations to
continue.
•
No, to delete the pair or pairs only if the primary system can change the status of both
P-VOL and S-VOL to SMPL.
6. Click Set, and then Apply.
If the operation does not start normally, an error code displays in the Error Code column in
the Preview list. To display an error message, select the LU, right-click, and select Error Detail.
7. Verify that operation completed successfully and that pair status is SMPL or Deleting on the
Pair Operation window. You can update the progress of the operation by clicking File/Refresh.
Releasing pairs 61