HP NonStop G-Series - Manual (Page 98)

Allows you to assign a rack name and rack offset for the enclosure. Rack name and rack offset are
displayed in the LCD for each disk drive enclosure and also as attributes under the enclosure object.
Rack name is arbitrary and can be up to eight characters long. Rack offset allows you to specify the
physical location within the rack. These ASCII characters cannot be used: =, +, &, or %.
Verify Path A Access
Verifies that Path A from the enclosure via FC-AL I/O module A to the FCSA FSAC is responding.
Verify Path B Access
Verifies that Path B from the enclosure via FC-AL I/O module B to the FCSA FSAC is responding.
E4SA (Ethernet 4 ServerNet Adapter)
Attributes
Actions
An adapter that connects the ServerNet connections inside a server to an Ethernet local area network
(LAN). The Ethernet 4 ServerNet Adapter (E4SA) CRU contains two Ethernet ServerNet
addressable controllers (SACs), each of which contains two Ethernet physical interfaces, for a total
of four Ethernet ports on each E4SA CRU.
Location in OSM Tree: System > Group > Module > E4SA
Slot Location: E4SA CRUs can be located in slots 53 and 54 in processor enclosures (service side)
or in slots 51, 52, 53, and 54 in IOMF or IOMF2 enclosures (service side).
Example: E4SA $ZZLAN.E4SA0 (1.1.53)
Attributes
E4SA
Service State
Displayed in the Attributes tab and Attributes dialog box only if the value is
something other than OK.
Values
Physical
Power State Indication of whether the component is powered On or Off.
Part Number
The part number of the component that was assigned in manufacturing. Use
part numbers for identifying and ordering parts.
Track ID
A unique serial number that identifies the component. Track IDs are used for
tracking components.
Hardware Revision
A code that identifies the generation of the component. Hardware revision
codes are used for tracking components.