HP NonStop G-Series - Manual (Page 132)

perform this action.
During startup, the controller operational code is automatically loaded into the SAC. When the Start
action completes, both the GESA and the SAC are in the Started state.
Stop
Rather than automatically stopping the GESA (as the Abort action does), this action first warns you
if the GESA is currently in use (and stops it only after you confirm).
Group (I/O or Processor Enclosure)
Attributes
Actions
A group contains all the components that are serviced by a pair of service processors (SPs). For
S-Series servers, an enclosure contains one group, and a group contains one module .
Location in OSM Tree: Under System
Examples: Group 11
Attributes
Group
Service State
Displayed in the Attributes tab and Attributes dialog box only if the value is
something other than OK.
Values
Logical
Service LED State
Indication of whether the service LED is on or off.
On: An OSM user has turned on the service LED by using the Set Service LED
State action.
Off: An OSM user has turned off the service LED by using the Set Service LED
State action.
Turning on the group service LED helps you locate the group for servicing. This
feature is useful when a system consists of multiple enclosures.
Actions
Power Off
Upon initiating the action, it first performs precautionary checks to ensure that you can safely power
off. These checks ensure that: