HP NonStop G-Series - Manual (Page 202)

Removes suppression caused by the Suppress Problem Incident Report Creation action. While this
suppression is automatically unsuppressed when the specified suppression time has been reached,
you can choose to end the suppression immediately using this action.
Tape Collection
Attributes
Actions
When one or more tape drives are connected to a system, a Tape Collection object appears in both
the tree pane and the overview pane of the OSM Service Connection. In both panes, this object
displays an alarm or yellow icon if alarms or degraded conditions exist on any of the individual tape
devices contained within. You can expand the Tape Collection icon in the tree pane (but not in the
overview pane) to select and monitor individual tape devices.
Location in OSM Tree: System > Tape Collection
Example: Tape Collection
Attributes
None.
Actions
None.
Tape
Attributes
Actions
Specifies a tape drive configured for a system.
Location in OSM Tree: System > Tape Collection > Tape Drive
Slot Location: Most tape drives can be connected physically through a cable connected to the MFC
SCSI port on the IOMF CRU or a SCSI SAC (available on a ServerNet/DA CRU, PMF2 (S74,000)
CRU, or IOMF2 CRU).
The CT9840/CT9840FC/CT9841FC cartridge tape drives must be connected to a SCSI SAC on
either a ServerNet/DA CRU, PMF2 CRU, or IOMF2 CRU.
Example: Tape Drive $TAPE1