HP Integrity NonStop H-Series - Manual (Page 50)

Operating the Tape Drive
5158ACL Tape Drive Installation and User’s Guide — 524955-002
3- 16
Show History
Show History
The Show History menu enables the operator to review the history of the tape
drive. For an example of the use of the Show History menu, see
Displaying
Error Logs on page 3-18. The configuration history, the original configuration,
and statistics on the number of operations the library robotics and the drives
have performed. You can be use this menu to retrieve.
Security
The Security menu permits the operator to lock the control panel, preventing
inadvertent or unauthorized access to the menu mode, which takes the tape
drive offline.
When you press Enter the screen shown in Figure 3-15 appears.
An underlined cursor appears under the first digit. To set the first digit, press the
! or " scroll button until the desired code number appears. To move the cursor
to the second digit, press Enter. Repeat the process for each of the four digits.
Remember to copy the 4-digit number. You will need it to enter the menu mode.
An unlock code of 0000 disables control panel locking.
Note.
•
When the control panel is locked, you cannot open the magazine door.
•
To display the Status menu without unlocking the control panel by pressing Escape at the
Default screen.
Figure 3-14. Security Menu
Figure 3-15. Code Select Menu