HP Integrity NonStop H-Series - Manual (Page 46)

Operating the Tape Drive
5158ACL Tape Drive Installation and User’s Guide — 524955-002
3- 12
Load/Unload
Show Status
When you select Show Status, either from the Main menu or from the Default
screen, the menus shown in
Figure 3-10 appears.
The menu options are:
•
Library
•
Drive Status(DLT1)
•
Map Info
Move the cursor up or down with the scroll buttons. Then press Enter.
Library Status Menu
When Library is selected, the menu in Figure 3-11 appears.
Note. The Show Status menu can be selected directly from the Default screen without
entering the menu mode by pressing Escape. In this way, you can check status at any time
without interrupting NonStop server operations.
Figure 3-10. Show Status Menu
Figure 3-11. Library Status Menu