HP Integrity NonStop H-Series - Manual (Page 38)

Operating the Tape Drive
5158ACL Tape Drive Installation and User’s Guide — 524955-002
3 -4
Buttons
Display Messages
The control panel display can show messages of up to four lines of 20
characters each. Many of these messages and their functions are described
next. Those displays that are described in other sections are cross-referenced
here.
Power-On-Self-Test Screen
When power is first applied to the tape drive, a series of power-on self-test
(POST) diagnostics is performed. During POST execution, the model number of
the tape drive, the current date and time, the firmware revision, and the status or
result of the test in progress appear on the control panel, as shown in
Figure 3-2 .
Status Menu
(while online) Returns to Default
screen Same as in
menu
mode Same as in
menu mode Same as in
menu mode
In Menu
Mode Rejects currently
displayed choice,
or
aborts control
panel operation in
progress, or
exits to next
higher
menu level, or
exits menu mode
to
Default screen
Accepts
currently
displayed
choice Scrolls one
line up through
list of options,
or
scrolls part of
display one
line to top of
list of options
Scrolls one
line down
through list of
options, or
scrolls part of
display one
line to bottom
of list of
options
Fault N.A. Clears Soft
Errors N.A. N.A.
Note. There is an auto-repeat feature for the scroll buttons. When you press either button for
more than one-half second, the control panel behaves as if you were pressing and releasing
the button four times per second. This effect stops when you release the button.
Table 3-1. Control Panel Functions
Screen Escape Enter 5 6