HP Integrity NonStop H-Series - Manual (Page 31)

Installing and Configuring the Tape Drive
5158ACL Tape Drive Installation and User’s Guide — 524955-002
2- 11
Set Reserved Slots
Set Reserved Slots
Use this setting to reserve a specified number of the slots in the magazine from
use. This function can be used only in Random Operating mode. At least one
reserved slot is required to use the Autoclean option.
Set Default (Restricted)
This option resets all of the preceding configuration options to their factory
defaults. Under no circumstances should this option be used.
Table 2-2 summarizes the configuration and default settings for the tape drive.
Other possible settings are shown in the second column.
Table 2-2. Tape Drive Configuration Options
Option Settings Default
Data Format Density: Auto Selection
Compression: Enable, Disable
(Enable at 10.0 only)
Auto
Auto
SCSI Lib Bus Parity: Enable, Disable
Lib Bus ID: (SCSI ID)
DLT1 Bus ID: (SCSI ID)
Enabled
3
5
Library mode Random, Seq. SDLT1
Sequential mode: Normal,
Recirculate
Sequential
Normal
Element Base Transport: NNNN (hex)
Storage: NNNN (hex)
Transfer: NNNN (hex)
0000
0001
00F0
Identification Vendor ID: OVERLAND
Product ID: LXB
TSI
515X ACL
Date DD,MMM,YYYY Current Date
Time HH,MM Current Time
Baud Rate [service provider use only] 38400
Serial Number NXNNNNNNN 999999999
Unload mode Implicit, Explicit Implicit
AutoClean mode Disabled, Enabled Disabled