HP StorageWorks 2405 Disk System - Manual (Page 78)

78 Installation
Step 9: Verify Devices on the Host
On the host system run IOSCAN (ioscan -f) and verify that the disks and LCC(s)
are listed in IOSCAN output. If the displayed “S/W State” is not “claimed,”
begin troubleshooting (see chapter 4).
Sample IOSCAN
Each LCC ( ctl ) or disk appears as a separate target in IOSCAN output.
Class I H/W Path Driver S/W State H/W Type Description
==============================================================================================
fc 0 0/4/0/0 fcT1 CLAIMED INTERFACE HP Fibre Channel Mass Storage
Adapter
lan 1 0/4/0/0.5 fcT1_cntl CLAIMED INTERFACE HP Fibre Channel Mass Storage
Cntl
fcp 0 0/4/0/0.8 fcp CLAIMED INTERFACE FCP Protocol Adapter
ba 4 0/5 lba CLAIMED BUS_NEXUS Local PCI Bus Adapter (782)
lan 2 0/5/0/0 btlan5 CLAIMED INTERFACE PCI Ethernet (10110019)
ba 5 0/8 lba CLAIMED BUS_NEXUS Local PCI Bus Adapter (782)
fc 4 0/8/0/0 td CLAIMED INTERFACE HP Tachyon TL/TS Fibre Channel
Mass Storage Adapter
fcp 4 0/8/0/0.8 fcp CLAIMED INTERFACE FCP Protocol Adapter
ext_bus 10 0/8/0/0.8.0.255.0 fcpdev CLAIMED INTERFACE FCP Device Interface
target 5 0/8/0/0.8.0.255.0.0 tgt CLAIMED DEVICE
disk 140 0/8/0/0.8.0.255.0.0.0 sdisk CLAIMED DEVICE HP 18.2GST318451FC
target 6 0/8/0/0.8.0.255.0.1 tgt CLAIMED DEVICE
disk 141 0/8/0/0.8.0.255.0.1.0 sdisk CLAIMED DEVICE HP 18.2GST318451FC
target 7 0/8/0/0.8.0.255.0.2 tgt CLAIMED DEVICE
disk 64 0/8/0/0.8.0.255.0.2.0 sdisk CLAIMED DEVICE HP 18.2GST318451FC
target 8 0/8/0/0.8.0.255.0.3 tgt CLAIMED DEVICE
disk 65 0/8/0/0.8.0.255.0.3.0 sdisk CLAIMED DEVICE HP 18.2GST318451FC
target 9 0/8/0/0.8.0.255.0.4 tgt CLAIMED DEVICE
disk 142 0/8/0/0.8.0.255.0.4.0 sdisk CLAIMED DEVICE HP 36.4GST336704FC
target 10 0/8/0/0.8.0.255.0.5 tgt CLAIMED DEVICE
disk 143 0/8/0/0.8.0.255.0.5.0 sdisk CLAIMED DEVICE HP 36.4GST336704FC
target 11 0/8/0/0.8.0.255.0.6 tgt CLAIMED DEVICE
disk 144 0/8/0/0.8.0.255.0.6.0 sdisk CLAIMED DEVICE HP 36.4GST336704FC
target 12 0/8/0/0.8.0.255.0.7 tgt CLAIMED DEVICE