HP StorageWorks 2405 Disk System - Manual (Page 17)

Product Description 17
Produ
ct
D
esc
ri
p
tio
n
Components
User-replaceable components enable high availability and easy maintenance.
This section describes the following components:
■ Disks and disk fillers
■ LCCs
■ Power supply/fan modules
Disks and Disk Fillers
Disks, shown in Figure 3, are 3.5-inch Low Profile disks in open metal carriers.
Disks are Fibre Channel.
The open carrier design requires careful handling to avoid disk damage by
breakage and static electricity. Avoid personal contact with hot surfaces.
WARNING Touching exposed circuits can cause electrical discharge and
disable the disk. Disks require careful handling and ESD
precautions.
The plastic parts of the disk are safe to touch:
■ Extraction handle (A in Figure 3)
■ Latch tab (B in Figure 3)
The initial disk options for this product are 73-Gbyte, 36-GByte and 18-GByte
drives. A label on the disk carrier shows the storage capacity and rotational speed
of the installed disk. Obtain information about the latest disk options from HP
sales representatives.
Disk fillers occupy unused slots to balance the air flow.
Caution Fillers must be installed in unused slots in order to maintain even
cooling around the remaining slots.