HP Virtual Connect 8Gb 24-port Fibre Channel Module for c-Class BladeSystem - Manual (Page 24)

Troubleshooting 24
Error code Details
VCSU_ERROR_CLI_COMMAND_FAILED CLI command exited with non zero status.
VCSU_ERROR_WEBSERVER_NOT_RESPONDING The web server is not responding.
VCSU_ERROR_CHECKPOINT_NOT_REDUNDANT Checkpoint not redundant
VCSU_ERROR_CHECKPOINT_PENDING Checkpoint pending redundancy
VCSU_ERROR_VCM_LOCKED VC is in a locked state.
VCSU_ERROR_VCM_NOT_LOCKED VC is not in a locked state.
VCSU_ERROR_CONFIG_PARSE_ERROR Failed to read the VC configuration details
VCSU_ERROR_VCM_CONFIG_NOT_IN_SYNC VC configuration is not in sync.
VCSU_ERROR_SSL_FAILED SSL connection error
VCSU_ERROR_SSL_INIT_FAILED SSL initialization error
VCSU_ERROR_SSL_WRITE_FAILED SSL write error
VCSU_ERROR_SSL_READ_FAILED SSL read error
VCSU_ERROR_SSL_OPEN_FAILED SSL open error
VCSU_ERROR_FTP_NO_DATA No data was received from the FTP server.
VCSU_ERROR_FTP_NOT_READY The FTP server is not ready.
VCSU_ERROR_FTP_USERNAME_NOT_VALID The FTP username is not valid.
VCSU_ERROR_FTP_PASSWORD_INVALID The FTP password is not valid.
VCSU_ERROR_FTP_REJECTED_PASSIVE_MODE The FTP server rejected passive mode.
VCSU_ERROR_FTP_REJECTED_COMMAND
The FTP server rejected the command.
VCSU_ERROR_FTP_NO_RESPONSE The FTP server is not responding.
VCSU_ERROR_FTP_RECEIVE_ERROR An FTP receive error exists.
VCSU_ERROR_FTP_INVALID_IP Invalid FTP server IP address
VCSU_ERROR_NO_UPDATABLE_MODULES
No target modules are found that can be
updated.
VCSU_ERROR_MODULE_UPDATE_NOT_REQD The specified module is not required to be
updated.
VCSU_ERROR_MODULE_ACTIVATE_NOT_REQD The specified module is not required to be
activated.
VCSU_ERROR_MODULE_INFO_NOT_AVAILABLE The specified module's information is not
available.
VCSU_ERROR_MODULE_NOT_PRESENT The specified module is not present.
VCSU_ERROR_MODULE_NOT_POWERED_ON The specified module is not powered on.
VCSU_ERROR_MODULE_NOT_OPERATIONAL The specified module is not operational.
VCSU_ERROR_ADMIN_PERMISSIONS_REQD
The admin privileges are required to upgrade
specified modules.
VCSU_ERROR_CHECKPOINT_RENAME_FAILED The checkpoint rename operation failed on the
specified modules.
VCSU_ERROR_VCM_CONFIGURATION_NOT_IN_SYNC The VC configuration is still not in sync.
VCSU_ERROR_VCM_FAILOVER_FAILED Failover to backup module failed.
VCSU_ERROR_BAY_CONFIGURATION_FAILED Unable to configure the bay
VCSU_ERROR_CLI_COMMAND_EXECUTION_FAILED Unable to execute CLI command on the target
module
VCSU_ERROR_MODULE_NOT_UPGRADABLE The specified module is not upgradeable.
VCSU_ERROR_MODULE_COMMAND_FAILED The command on the target module failed.
VCSU_ERROR_RESET_TIME_OUT The reset on the target module timed out.