HP Smart Update Manager - Manual (Page 58)

Table 3 HP SUM Linux network ports
Description Ports
Establishes a connection to the remote Linux server via
SSH. For Integrity servers, HP SUM uses this port to discover
target settings. Port 22
A secure data port used to transfer information. 443
Default for some internal communications. It listens on the
remote side if there is no conflict. If a conflict occurs, the
next available port is used. Port 62286
Updates are passed to the target and retrieved through an
internal secure web server that uses port 80 if it is available Ports 80 or 63006
or port 63006, if it is not. This support allows iLO and VC
firmware updates without having to access the host server.
It also allows servers running VMware or other virtualization
platforms to update their iLO without having to reboot their
server or to migrate their virtual machines to other servers.
NOTE: HP SUM attempts to determine if a server running
HP SUM also hosts a web server.In some cases, HP SUM
cannot detect an existing web server and attempts to use
port 80. If this occurs, installations that use HP SUM will
fail. If failure occurs, move HP SUM to another server or
workstation that is not already running a web server. You
can also disable the web server until HP SUM installations
are complete.
58 Advanced topics