AIS Router AI2524 - Manual (Page 98)

AI2524 Router Card User’s Manual
Page 6-4 August 1997
2524UM
6. Enter an enable secret password:
The enable secret is a one-way cryptographic secret used instead of the enable
password when it exists.
Enter enable secret: pail
The enable password is used when there is no enable secret and when using older
software and some boot images.
7. Enter the enable and virtual terminal passwords:
Enter enable password: shovel
Enter virtual terminal password: vterm1
8. Press to accept Simple Network Management Protocol
(SNMP) management, or type no to refuse it:
Configure SNMP Network Management? [yes]: no
9.9.
9. Configure the appropriate protocols for your router:
Configure Vines? [no]:
Configure LAT? [no]:
Configure AppleTalk? [no]: yes
Multizone networks? [no]: yes
Configure DECnet? [no]:
Configure IP? [yes]:
Configure IGRP routing? [yes]:
Your IGRP autonomous system number [1]: 15
Configure CLNS? [no]:
Configure bridging? [no]:
Configure IPX? [no]: yes
Configure XNS? [no]:
Configure Apollo? [no]:
10. Enter the ISDN BRI switch type for the router. The ISDN switch
type appropriate for the router depends on the ISDN provider's
equipment.
Enter ISDN BRI Switch Type [none]: basic-5ess