AIS Router AI2524 - Manual (Page 9)

AI2524 Router Card User’s Manual
August 1997 TOC-5
2524UM
Example: Dynamic Routing in Overlapping Areas ......................................... 9-13
Example: Dynamic Interdoma inRouting ........................................................9-15
Configure ISO IGRP Parameters .....................................................................9-17
Configure IS-IS Dynamic Routing ...............................................................................9-19
Enable IS-IS .....................................................................................................9-19
Examples: IS-IS Routing Configuration ..........................................................9-20
Assign Multiple Area Addresses to IS-IS Areas.............................................. 9-23
Examples: NETs Configuration .......................................................................9-24
Example: Router in Two Areas........................................................................9-25
Configure IS-IS Parameters .............................................................................9-27
Configure IS-IS Interface Parameters ..............................................................9-30
Configure CLNS Static Routing ...................................................................................9-33
Enable Static Routes ........................................................................................9-33
Examples: Basic Static Routing.......................................................................9-34
Example: Static Intradoma inRouting ..............................................................9-36
Example: Static Interdoma inRouting ..............................................................9-38
Configure Variations of the Static Route ......................................................... 9-41
Map NSAP Addresses to Media Addresses..................................................... 9-41
Configure Miscellaneous Features ................................................................................9-43
Specify Shortcut NSAP Addresses ..................................................................9-43
Use the IP Domain Name System to Discover ISO CLNS Addresses ............ 9-44
Create Packet-Forwarding Filters and Establish Adjacencies ......................... 9-44
Examples: CLNS Filter....................................................................................9-45
Redistribute Routing Information ....................................................................9-45
Examples: Route Map......................................................................................9-48
Specify Preferred Routes .................................................................................9-49
Configure ES-IS Hello Packet Parameters ...................................................... 9-49
Configure CLNS over WANs .......................................................................................9-51
Example: ISO CLNS over X.25.......................................................................9-51
Enhance ISO CLNS Performance.................................................................................9-53
Specify the MTU Size......................................................................................9-54
Disable Checksums ..........................................................................................9-54
Disable Fast Switching Through the Cache ..................................................... 9-54
Set the Congestion Threshold ..........................................................................9-55
Transmit Error Protocol Data Units (ERPDUs)...............................................9-55
Control Redirect Protocol Data Units (RDPDUs) ........................................... 9-55
Configure Parameters for Locally Sourced Packets ........................................9-56
Example: Performance Parameter ..................................................................9-56
Monitor and Maintain the ISO CLNS Network............................................................9-57
Configure TARP on ISO CLNS....................................................................................9-59
TARP Configuration Task List........................................................................9-60
Enable TARP and Configure a TARP TID...................................................... 9-60
Disable TARP Caching ....................................................................................9-61
Disable TARP PDU Origination and Propagation........................................... 9-61
Configure Multiple NSAP Addresses ..............................................................9-61
Configure Static TARP Adjacency and Blacklist Adjacency .......................... 9-61
Determine TIDs and NSAPs............................................................................9-62
Configure TARP Timers..................................................................................9-63