Router configuration mode, Router configuration mode -15, Chapter 4: understanding the user interface – AIS Router AI2524 User Manual
Page 51

Chapter 4: Understanding the User Interface
August 1997
Page 4-15
2524UM
Router(config)# interface serial 2
Router(config-if)# encapsulation frame-relay
Router(config-if)# interface serial 2.1
Router(config-subif)# ?
Interface configuration commands:
apollo
Apollo interface subcommands
appletalk
Appletalk interface subcommands
bandwidth
Set bandwidth informational parameter
bridge-group
Transparent bridging interface parameters
clns
CLNS interface subcommands
decnet
Interface DECnet config commands
delay
Specify interface throughput delay
description Interface
specific description
exit
Exit from interface configuration mode
frame-relay Set
frame
relay parameters
ip
Interface Internet Protocol config commands
ipx
Novell interface subcommands
isis
IS-IS commands
iso-igrp
ISO-IGRP interface subcommands
no
Negate a command or set its defaults
ntp
Configure NTP
shutdown
Shutdown the selected interface
Router Configuration Mode
Router configuration commands configure an IP routing protocol.
Router(config)# router ?
bgp
Border Gateway Protocol (BGP)
egp
Exterior Gateway Protocol (EGP)
igrp
Interior Gateway Routing Protocol (IGRP)
isis
ISO IS-IS iso-igrp IGRP for OSI networks
ospf
Open Shortest Path First (OSPF)
rip
Routing Information Protocol (RIP)
static Static
CLNS
Routing