Example: svcs on a subinterface, Example: svcs on a subinterface -10 – AIS Router AI2524 User Manual
Page 326
AI2524 Router Card User’s Manual
Page 13-10
August 1997
2524UM
2.
Specify the subinterface IP address, if needed.
ip address
ip-address
mask
3.
Assign a map group to the subinterface.
map-group
group-name
Example: SVCs on a Subinterface
This example configures a point-to-point interface for SVC operation.
This example assumes that the main serial 0 interface has been config-
ured for signalling, and that SVC operation has been enabled on th
main interface.
int s 0.1 point-point
Define the map-group; details are specified under the
map-list
holiday
command:
map-group holiday
Associate the map-group with a specific source and destination:
map-list holiday local-addr X121
Specify destination protocol addresses for a map-class:
ip 131.108.177.100 class hawaii IETF
appletalk 1000.2 class rainbow IETF broadcast
Define a map class and its QOS settings:
map-class hawaii
frame-relay cir in 2000000
frame-relay cir out 56000
frame-relay be 9000