Canon Color imageCLASS MF8580Cdw - Manual (Page 63)

63
Fax
Using the Machine Primarily for Phoning
Set the fax receive mode to <Manual>.
1
Switch to the Fax mode ( → p.15).
2
Press [ ▲ ] or [ ▼ ] to highlight , and then press [OK].
3
Press [ ▲ ] or [ ▼ ] to highlight , and then press [OK].
When a Fax or Call Comes In
The machine continuously rings in Manual mode. Pick up the receiver of the external
telephone to answer the call. If the call is a fax, you will hear a beep. See “Receiving Faxes in
Manual Mode” below to receive faxes manually.
Receiving Faxes in Manual Mode
Follow the procedure below to receive faxes manually.
1
When an incoming call rings, pick up the telephone receiver.
2
If you hear a beep, press [ ▲ ] or [ ▼ ] to highlight , and
then press [OK].
• If you do not hear a beep, start your conversation.
3
Hang up the receiver.
•
When you pick up the telephone and get a fax signal, you do not need to
go to the machine to receive the fax. Just enter the remote RX ID number
(default setting: 25) with the telephone, and you can start receiving the fax.
• To change the remote RX ID, press [ ]  <Fax Settings>  <RX
Function Settings>  <Remote RX>  <On>  specify the remote
RX ID number  <Apply>  [
].
2
5