Canon Color imageCLASS MF8580Cdw - Manual (Page 54)

54
Specifying the Double-Sided Document Format
(MF8580Cdw Only)
You can set the document format to scan double-sided documents automatically.
1
Place your documents ( → p.18).
2
Switch to the Fax mode ( → p.15).
3
Press [ ▲ ] or [ ▼ ] to highlight <2-Sided Original>, and then press [OK].
4
Press [ ▲ ] or [ ▼ ] to highlight the desired option, and then press [OK].
Read only one side of documents.
• Read both sides of documents.
• Select when the document is
book type.
• Read both sides of documents.
• Select when the document is
calendar type.
5
Send a fax to the desired destination ( → p.55).
Changing the Default Settings
You can change the default settings that are applied when the machine is restarted, [ ] is
pressed or the screen is returned to the default screen after auto reset is performed.
1
Press [ ].
2
Press [ ▲ ] or [ ▼ ] to highlight , and then press [OK].
3
Press [ ▲ ] or [ ▼ ] to highlight , and then press [OK].
4
Press [ ▲ ] or [ ▼ ] to highlight , and then press
[OK].
5
Press [ ▲ ] or [ ▼ ] to highlight the desired option, and then press [OK].
Make the resolution higher or lower.
Make the density lighter or darker.
<2-Sided Original>*
Set whether to read one side of documents or both sides of
documents automatically.
Increase the sharpness to enhance the clarity of an image, or
decrease the sharpness to soften an image.
* MF8580Cdw only
6
Specify the desired setting.
7
After you have specified the setting, press .
8
Press [ ] to close the screen.