Canon imagePROGRAF iPF815 MFP M40 - Manual (Page 42)

42
Error Messages
Error Message Cause Corrective Action
Rewinding error. There is some foreign object near
the Media Take-up Unit sensor
and the roll cannot be detected. Remove the foreign object near the sensor.
The Media Take-up Unit sensor
is soiled and the roll cannot be
detected. Wipe the sensor with a dry cloth to clean it.
The Media Take-up Unit sensor is
damaged. Contact your Canon dealer for assistance.
The roll is out of range of detection
by the Media Take-up Unit
sensor. Reload the roll.
A paper jam has occurred and the
roll cannot be rewound. Remove the paper from the Media Take-up Unit .
Press the Online button to clear the error.
Turn on the media take-up unit. The Media Take-up Unit was off
when you selected Enable for
Take-up Reel .
Turn the Media Take-up Unit on.
Media take-up unit ready. The Take-up Reel setting in the
printer MAIN MENU was changed
from Enable to Disable , but a print
job was received before the roll
was removed.
Press the Stop button and stop printing.
The mode switches from take-up mode to regular
mode after you change the Take-up Reel setting in
the MAIN MENU from Enable to Disable and lift the
Release Lever , or after you execute Paper Cutting .
Press the Online button to resume printing.
Multi-sensor error Direct sunlight or strong lighting
may be shining on the printer and
causing the sensor to malfunction. Take steps to ensure the printer is not used when
exposed to direct sunlight or strong lighting.
The performance of a sensor
inside the printer may be impaired. Turn off the printer and wait at least three seconds
before restoring the power.
Too many jobs for mail box. Saved jobs exceed the personal
box capacity. Press the Stop button to cancel the print job.
Delete print jobs from the queue.
Delete unneeded jobs stored in personal boxes (box
numbers in the range 01–29).
Mail box nearly full. The free hard disk space left for
personal boxes in the printer's
hard disk does not have 1 GB,
combined. Delete unneeded jobs stored in personal boxes.
The mail box is full. There is no more space on the
printer's hard disk. Press the Stop button to cancel the print job.
Delete print jobs from the queue.
Delete unneeded jobs stored in personal boxes (box
numbers in the range 01–29).
(→"Managing Queued Jobs (Deleting or Preempting
Other Jobs)," User Manual)
(→"Deleting Saved Jobs," User Manual)
(→"Managing Queued Jobs (Deleting or Preempting
Other Jobs)," User Manual)
(→"Deleting Saved Jobs," User Manual)
If the message is displayed again, contact your Canon
dealer for assistance.
(→"Deleting Saved Jobs," User Manual)
(→ , Loading Rolls in the Printer)