Canon imagePROGRAF iPF815 MFP M40 - Manual (Page 35)

35
Error Messages
Error Message Cause Corrective Action
Top cover is open. The printer has detected that the
Top Cover is open. Open the Top Cover fully, remove any foreign objects,
and close the Top Cover again.
If the error occurs again, close the Top Cover , turn off
the printer, and wait a while before restoring power.
ERROR Exxx-xxxx (x represents
a letter or number) An error requiring service may
have occurred. Write down the error code and message, turn off the
printer, and contact your Canon dealer for assistance.
Sheet printing is selected. You have attempted to print a test
print sheet or other printer status
information on a sheet, but no
sheet is loaded. Load a sheet and try printing again.
To print on a roll instead, hold down the Stop button
for more than a second to cancel printing, load a roll,
and then print.
Regular printing is selected, but
a roll is loaded. A print job for printing on sheets
was sent when a roll is loaded. Hold down the Stop button for a second or more to
cancel printing.
Remove the roll and load a sheet of the type and size
of paper you have specified in the printer driver.
You are using a roll with the Media
Take-up Unit , but a print job
requiring sheets was sent. Press the Stop button for a second to cancel the
job involving sheets. 1.
Choose Paper Cutting in the menu. 2.
Press the Load/Eject button and remove the roll. 3.
Load a sheet and resend the print job. 4.
Sheet removed. A sheet has come out of the printer
during printing. Lift the Release Lever and remove the paper.
End of paper feed. You are pressing the ▲ button on
the Control Panel and trying to
rewind the roll to the edge. Release the ▲ button.
(→ , Removing the Roll from the Printer)
(→"Loading and Printing on Sheets," User Manual)
1.
If Not finished printing. Finish printing
remaining jobs? is shown on the Display Screen ,
press the OK button. 2.
Printing will resume, starting from the page on
which the error occurred.
(→"Loading and Printing on Rolls," User Manual)