Canon XEED WUX450 - Manual (Page 95)

95
Setting Display Status (Input Settings)
Oper
ation
Setti
ng Fu
nctio
n
s fr
om Me
nus
Specifying Split-
Screen Display
> [Input settings] > [Split screen]
You can project two input images
side by side. (
P81 )
Press the OK button to accept your
setting and then press the MENU
button or EXIT button. The image under
your control is labeled with a split-
screen icon.
• [Off] is the factory default.
• The SPLIT button on the remote control can
also be used to select the [Split screen]
settings.
• If or is displayed in the center of the
image area, switch control to the other side
by pressing the [ ] / [ ] buttons on the
remote control.
• When you switch to split-screen display, a
dialog box indicates the left and right
signals and input status.
HDMI Component LAN
Digital PC Analog PC USB
Off Exit split-screen mode.
On Activates split-screen mode.
Settings Split
screen
Off Specify whether to
use split-screen
display.
On
Control
rights Left
screen Select the image to
control.
Right
screen