Canon XEED WUX450 - Manual (Page 73)

73
Op
er
ation
Pr
oje
ctin
g
an Imag
e
Step 7
Set Power-Saving Settings
Press the ECO button on the remote control to complete power-saving settings.
The following three settings are available.
• Lamp Settings
For changing lamp and fan power consumption in the current image mode.
• Auto Power-Off
A function for automatically turning the power off after a certain period if the
projector is not used and there is no input signal.
• Network Standby Settings
Specify whether network functions should be active in standby mode.
1
Press the ECO button to display the window shown below.
2
Press the [ ] / [ ] buttons to select a menu.
Complete the setting for the selected function. For details, refer to the page
describing each function.
• Lamp Settings (
P107 )
• Auto Power-Off ( P110 )
• Network Standby Settings ( P172 )
Remote control