Checking projector information – Canon XEED WUX450 User Manual
Page 122
122
Checking Projector Information
>
[Information]
You can check information about the
signal types of the images projected
and other information.
Information shown
* Not displayed when network functions are [Off].
HDMI
Component
LAN
Digital PC
Analog PC
USB
Item
Explanation
Model name
WUX450/WX520/WUX400ST/WX450ST
Input signal
Details of the input signal currently selected
Information such as the type, resolution, and frequency of
the signal is displayed.
Firmware
Current firmware version
Serial no.
Serial number unique to this projector
E-mail sender
address*
Sender e-mail address used for sending error mails
(
)
E-mail recipient
address*
Displays [Already set] or [Not set] to show whether a
recipient e-mail address has been set for receiving error
mails. (
)
Projector name*
Name which identifies this projector on the network
Location*
Location where the projector is installed
System information
ID
System information. Normally this is not displayed.