Canon XEED WUX450 - Manual (Page 203)

203
Replacing the Lamp
Inst
all
a
tion an
d Ma
intena
nce
Ma
inten
ance
3
As you hold down the lamp cover release button, slide the lamp cover
toward the back, and then lift the cover to open it.
4
Loosen the three screws securing the lamp unit.
5
Remove the lamp unit.
6
Follow this procedure in reverse to install a new lamp unit.
As you slide the lamp cover toward the back, be careful not to pinch
your fingers between the lamp cover. We recommend using both
hands to slide the cover, as shown.
Release button