Canon XEED WUX450 - Manual (Page 169)

169
Inst
alla
tio
n
an
d Main
te
na
nce
Con
necting
to a Networ
k
Completing Projector Settings
From the projector menus screen,
network settings can be configured in
the [Network Setting] tab. For
instructions on menu operations, refer
to “Using Menus”. (
P84 )
Locking/Unlocking
Network Settings
> [Network Settings] >
[Network settings lock]
You can lock/unlock the network
settings so that they cannot be
changed.
Press the OK button to accept your
setting, and then press the MENU
button or EXIT button to close the
window. The settings are now locked
again. If you change the network
settings, be sure to continue operating
without closing the window.
• [Lock] is the factory default.
• The factory default network password is [ ]
[ ] [ ] [ ].
Unlock Cancels the lock and allows
other network settings to be
changed. The password must
be entered in order to cancel the
lock.
Selecting [Unlock] will display
the following window. Use the
[ ] / [ ] / [ ] / [ ] buttons to
enter the 4-digit password.
Lock Lock the settings.