Canon XEED WUX450 - Manual (Page 158)

Installation-Related Menu Settings
158
Showing/Hiding the
Test Pattern
> [Install settings] > [Test pattern]
You can project a test pattern ( P291 )
to check resolution, color, and other
details even without supplying an
input signal.
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• [Off] is the factory default.
• During test pattern display, you can use the
[ ] / [ ] buttons to switch test patterns.
Additionally, if a test pattern has option
settings, you can change the settings using
the [ ] / [ ] buttons. (
P291 )
• The test pattern can also be displayed or
turned off by pressing the TEST PATTERN
button on the remote control.
HDMI Component LAN
Digital PC Analog PC USB
Off The test pattern is not displayed.
On Displays the test pattern.