Canon XEED WUX450 - Manual (Page 151)

Installation-Related Menu Settings
151
Inst
alla
tio
n
an
d Main
te
nan
ce
Inst
allation
Specifying Micro
Digital Image Shift
> [Install settings] > [Professional
settings] > [Micro-digital image
shift]
Use this setting to fine-tune digital
image shift.
When you have completed the
adjustment, press the OK button to
accept your setting and then press the
MENU button or EXIT button.
• [Off] is the factory default.
• Select [Adjust] to fine-tune the image
position.
Adjusting Image
Registration
> [Install settings] > [Professional
settings] > [Registration]
Adjusts colors that are out of
alignment. You can adjust red and
blue registration independently,
relative to green.
When the setting is completed, press
the OK button to accept your setting
and then press the MENU button or
EXIT button.
• [Off] is the factory default.
• You can adjust image registration by
selecting [Red] or [Blue].
HDMI Component LAN
Digital PC Analog PC USB
Off Does not perform micro digital image
shift.
Adjust Performs micro digital image shift.
Use the [ ] / [ ] buttons for vertical
shift.
Use the [ ] / [ ] buttons for horizontal
shift. When you have finished
correcting, press the OK button.
HDMI Component LAN
Digital PC Analog PC USB
Off Does not perform image registration.
Adjust Performs image registration.
When the setting is completed, press
the OK button.