Canon XEED WUX450 - Manual (Page 35)

35
Preparing the Remote Control
Be
fo
re
Us
e
■ Remote Control Operating Range
The remote control is an infrared type. Point it at the infrared remote receiver on the
front or rear of the projector to operate it.
• Use the remote control within an angle of 25° in any direction from directly in front of the
infrared remote receiver.
• The remote control may be inoperative if there is an obstacle between the remote
control and the projector or the infrared remote receiver on the projector is exposed to
direct sunlight or strong light of lighting equipment.
• When you use 2 or more projectors at the same time, you can change the channel
settings to prevent the 2 remote controls from interfering with each other. ( P113 )
WUX450/WX520 WUX400ST/WX450ST
25°
25°
8 m (26.3')
8 m (26.3')
25°
25°
25°
25°
4 m (13.1')
8 m (26.3')
25°
25°