Completing computer settings, Mail authentication settings [mail auth – Canon XEED WUX450 User Manual
Page 188
Completing Computer Settings
188
Mail Authentication Settings [Mail auth]
From [Mail auth] in the settings screen, you can configure the settings for
authentication of mail that is sent when an error occurs. For the setting procedure,
refer to “Displaying the Network Configuration Screen” (
Item
Explanation
Factory default setting
Mail authentication
Select the mail authentication
method. If OFF is selected,
the other mail authentication
settings cannot be changed.
OFF
User name
Enter the user name to use for
mail authentication in 1-byte
alphanumeric characters and
symbols (1 - 63 characters).
Password
Enter the password for mail
authentication in 1-byte
alphanumeric characters and
symbols (1 - 63 characters).
Confirm password
For confirmation, enter the
same password as you
entered in [Password].
POP3 server IP address
Enter the POP3 server IP
address in 1-byte numbers.
0.0.0.0
POP3 server port number
Enter the POP3 server port
number in 1-byte numbers (1 -
65535).
110
POP before SMTP response
time
Enter the SMTP authentication
timeout period after POP3
authentication (units:
milliseconds) using 1-byte
numbers (0 - 9999
milliseconds).
300