Canon XEED WUX450 - Manual (Page 185)

185
Completing Computer Settings
Inst
alla
tio
n
an
d Main
te
na
nce
Con
necting
to a Networ
k
Item Explanation Factory default setting
Password
User name
When logging into the web
screen, enter the user name
in 1-byte alphanumeric
characters and symbols (4 -
15 characters). root
New password When logging into the web
screen, enter the password in
1-byte alphanumeric
characters and symbols (4 -
15 characters). system
Confirm new password For confirmation, enter the
same password that you
entered in [New password]. system
TCP/IP
DHCP
Select whether to turn the
DHCP function on or off. If the
function is on, because the IP
address is acquired from the
server, it is not possible to
enter the [IP address],
[Subnet mask], and [Default
gateway]. OFF
IP address Enter the IP address of the
projector in 1-byte numbers. 192.168.254.254
Subnet mask Enter the subnet mask in 1-
byte numbers. 255.255.255.0
Default gateway Enter the default gateway IP
address in 1-byte numbers. 0.0.0.0
If settings related to TCP/IP were changed, it is necessary to disconnect and reconnect to
the network.
If the network subnet mask was changed, select [Subnet mask] in the above screen and
set the new subnet mask.