Brother MFC-9420CN - Manual (Page 74)

5
5
5 - 1
Remote Setup
The Remote Setup application enables you to configure many
MFC settings from a Windows
® application. When you access
this application, the settings on your machine will be
downloaded to your PC and displayed on your computer
screen. If you change the settings, you can upload them
directly to the machine.
Note
You cannot use the Remote Setup application if your machine
is connected via a Network. (See Network User’s Guide.)
From the Start menu, select All Programs, Brother,
MFL-Pro Suite MFC-9420CN, Remote Setup and then
MFC-9420CN USB or MFC-9420CN LAN.
■
OK
When you click OK, the process of uploading the data to the machine begins. The Remote Setup program is
closed if an error message is displayed, enter the correct data again and then click OK.
■ Cancel
The Cancel button clears your changes and exits the Remote Setup application without uploading any data
to the machine.
■
Apply
The Apply button uploads the data to the machine, but stays in the Remote Setup application so you can
make more changes.
■
Print
The Print button prints the selected items on the machine. You cannot print the Remote Setup changes until
you click the Apply button to upload the new data to the machine. Then you can click the Print button to get
an up-to-date printout.
■
Export
Click the Export button to save your current settings to a file.
■
Import
Click the Import button to read the settings from your saved file into the Remote Setup screen.
Note
■ You can use the Export and Import buttons to save and use several sets of settings for your machine.
■ To save all your settings, highlight MFC-9420CN at the top of the settings list then click Export.
■ To save a single setting or a group of settings, highlight each setting or function heading (for example, to
select all fax settings highlight Fax) from the setting list then click Export.
Remote Setup