Brother MFC-9420CN - Manual (Page 141)

Network Scanning (For Mac OS ® X 10.2.4 or greater)
10 - 5
10
Scan to Image
When you select Scan to Image your document will be scanned and sent directly to the Macintosh ® you
designated on your network. ControlCenter2 will activate the default graphics application on the designated
Macintosh
® . You can change the scan configuration. (See Image (example: Apple PreView) on page 9-4.)
1
Place the document face up in the ADF, or face down on the scanner glass.
2
Press Scan.
3
Press ▲ or ▼ to select Scan to Image .
Press Menu/Set.
4
Press ▲ or ▼ to select the destination Macintosh ® you want to send to.
Press Menu/Set.
If the LCD prompts you to enter a Pin number, enter the 4-digit Pin number for the destination Macintosh ®
on the control panel.
Press Menu/Set.
The machine will start the scanning process.
Scan to OCR
When you select Scan to OCR your document will be scanned and sent directly to the Macintosh ® you
designated on your network. ControlCenter2 will activate Presto! ® PageManager ® OCR and convert your
document into text for viewing and editing from a word processing application on the designated Macintosh ® .
You can change the scan configuration. (See OCR (Word Processing program) on page 9-5.)
1
Place the document face up in the ADF, or face down on the scanner glass.
2
Press Scan.
3
Press ▲ or ▼ to select Scan to OCR .
Press Menu/Set.
4
Press ▲ or ▼ to select the destination Macintosh ® you want to send to.
Press Menu/Set.
If the LCD prompts you to enter a Pin number, enter the 4-digit Pin number for the destination Macintosh ®
on the control panel.
Press Menu/Set.
The machine will start the scanning process.