Wia compliant, Accessing the scanner, Xp only) -8 – Brother MFC-9420CN User Manual
Page 41: Wia compliant -8 accessing the scanner -8, Xp only)
Scanning
2 - 8
2
Scanning a document using the WIA driver
(For Windows
®
XP only)
WIA compliant
Windows
®
XP uses Windows
®
Image Acquisition (WIA) for scanning images from the machine. You can scan
images directly into the PaperPort
®
9.0SE viewer that Brother included with your machine or you can scan
images directly into any other software application that supports WIA or TWAIN scanning.
Accessing the scanner
1
Open your software application to scan the document.
Note
The instructions for scanning in this Guide are for when you use ScanSoft
®
PaperPort
®
9.0SE. The steps for
scanning from another application may vary.
2
Select Scan from the File drop-down menu or select the Scan button.
The Scan panel appears on the left of the screen.
3
Select WIA-Brother MFC-9420CN from the Scanner drop-down list box.
Note
■
If the machine is connected via:
Parallel cable use WIA-Brother MFC-9420CN
USB cable use WIA-Brother MFC-9420CN USB
LAN cable use WIA-Brother MFC-9420CN LAN
■
If you choose TW-Brother MFC-9420CN, the TWAIN driver will run.
4
Click Scan.
The Scan dialog box will appear: