Brother MFC-9420CN - Manual (Page 14)

Printing
1 - 6
1
Calibration
The output density for each color may vary depending on the environment the machine is in such as
temperature and humidity. Calibration helps you to improve the color density.
1
Press Menu/Set, 4, 4.
2
Press ▲ or ▼ to select Calibrate .
3
Press Menu/Set.
4
Press 1 to select Yes .
You can reset the calibration parameters back to those set at the factory.
1
Press Menu/Set, 4, 4.
2
Press ▲ or ▼ to select Reset .
3
Press Menu/Set.
4
Press 1 to select Yes .
Note
If an error message is displayed, press Stop/Exit and try again. For more information, see Troubleshooting
and routine maintenance in the User’s Guide.