4 network scanning, Before using network scanning, Network license – Brother MFC-9420CN User Manual

Page 67: Network scanning, Before using network scanning -1, Network license -1

4 - 1

To use the machine as a Network Scanner, the machine must be configured with a TCP/IP address that
matches your network. You can set or change the settings from the control panel. (Please see the Network
User's Guide on the CD-ROM.)

Before using Network Scanning

Network License

MFC-9420CN includes the PC license for up to 5 Users.

This license supports the installation of the MFL-Pro Software Suite including ScanSoft

PaperPort

9.0SE

on up to 5 PC’s for use on a network.

If you want to use more than 5 PCs with ScanSoft

PaperPort

9.0SE installed, please purchase NL-5 which

is a multiple PC license agreement pack for up to an additional 5 Users. To purchase NL-5, please contact
your Brother Sales Office.

Note

■

Max. 25 clients can be connected to one machine on a Network. For example, if 30 clients try to connect
at a time, 5 clients will not be shown on the LCD.

■

To use Network Scanning with Windows

XP that is protected by the firewall, Network Scanning program

must be excluded from the firewall setting. Visit the Solution Center (http://solutions.brother.com) for more
information.

■

Network Scanning is not supported in Windows NT

Network Scanning