Brother TD-2120N - Manual (Page 90)

86
A
A
General procedure for the P-touch Template function
A
The general procedure for using the P-touch Template function is described below.
For details on specifying the various settings, refer to Printing labels using P-touch Template on page 60.
Before connecting the barcode reader to this printer, be sure to specify barcode reader settings and the
settings in the P-touch Template Settings tool specified during preparation. For a detailed procedure, see
Preparation on page 61.
a Use P-touch Editor 5.0 to create a template, and then transfer it to the printer.
b Connect the barcode reader to the printer.
c Scan the “P-touch template command” barcode.
This allows the settings to be specified or clears the previous settings.
d Scan the “Basic settings” barcode.
Specify the number of copies to be printed.
e Specify the appropriate settings (A, B or C).
A.Preset template printing
A
1 Scan the “Preset template number” barcode.
B.Barcode printing
A
1 Scan the “Select template” barcode, then the barcodes under “For entering numbers”.
2 Scan the barcode whose data is to be used or copied.
3 Scan the “Begin printing” barcode.
C.Database-assisted label printing
A
1 Scan the “Select template” barcode, then the barcodes under “For entering numbers”.
2 Scan the key barcode for the database data to be used.
3 Scan the “Delimiter” barcode.
4 Scan the “Begin printing” barcode.
f
The specified label is printed.
Appendix
A