Brother RJ-4040 - Manual (Page 7)

Setting Up the Printer
3
1
Using the
Rechargeable Li-ion
Battery (Optional)
1
Installing the Rechargeable
Li-ion Battery
1
a
Open the battery cover by pressing the
cover latch.
1 Battery cover
2 Cover latch
b
Swing the cover open and remove it.
c
Insert the battery into the battery
compartment.
d
Confirm that the hooks on the edge of
the battery cover are inserted correctly,
and then reattach the cover.
Note
The voltage supplied by the rechargeable
Li-ion battery fluctuates. The printing
speed may also fluctuate depending on
the voltage.
Removing the Rechargeable Li-ion
Battery
1
Remove the battery cover and the
rechargeable Li-ion battery, and then
reattach the battery cover.
Charging the Rechargeable
Li-ion Battery
1
The rechargeable Li-ion battery can be
charged while it is inserted in the printer.
Perform the following procedure to charge
the rechargeable Li-ion battery.
1
2