Brother RJ-4040 - Manual (Page 29)

Using the Printer
25
2
Indicators
2
RJ-4030
2
RJ-4040
2
The indicators light and blink to indicate the printer’s status. Each indicator may light or blink in
green, red, orange, or blue. For details, see Indicators uu page 48.
(Wi-Fi) button
function (RJ-4040 only)
Operation
Use WPS to set wireless network
settings easily Wi-Fi settings can be configured by simply pressing and holding this
button, making it easy to install the printer driver or other software (see
Installing the Printer Driver and the Software for RJ-4040
uu
page 10).
Use Wi-Fi to communicate when
printing When the printer and computer are not connected via Wi-Fi, press this
button to connect them and send data to the printer.
End the Wi-Fi connection When the printer and computer are connected via Wi-Fi, press this
button to end the connection.
Start up the printer in mass
storage mode If you press this button while pressing and holding the (Power)
button, the printer starts up in mass storage mode (see Mass Storage
uu
page 44).
Execute a file stored in the mass
storage area If you press this button while the printer is running in mass storage
mode, you can execute a command file stored in the mass storage
area (see Mass Storage uu page 44).