Brother RJ-4030 Instruction Manuals and User Guides
We have 7 Instruction Manuals and User Guides for RJ-4030 Brother
Manuals 
| Recognized languages: | English |
|---|---|
| Pages: | 48 |
| Size: | 1.21 MB |
Show table of contents
Document Outline
- IMPORTANT - PLEASE READ CAREFULLY
- Introduction
- About Raster Commands
- 1. Printing Using Raster Commands
- 2. Print Data
- 3. Print Command List
- 4. Printing Command Details
- NULL Invalidate
- ESC i S Status information request
- ESC @ Initialize
- ESC i U Additional media information command
- ESC i d Specify margin amount (feed amount)
- ESC i a Switch dynamic command mode
- g Raster graphics transfer
- ESC i B Specify baud rate
- Z Zero raster graphics
- FF Print command
- Control-Z Print command with feeding
- ESC i z Print information command
- M Select compression mode
- 5. MCR Command Specifications
- 6. Flow Charts
- 6.1 Normal flow for USB connection
- 6.2 Error flow for USB connection (when feeding at the end of the page)
- 6.3 Error flow for USB connection (with a concurrent printing error such as end of tape)
- 6.4 Cooling flow for USB connection
- 6.5 Flow for setting serial connection baud rate
- 6.6 Normal flow for serial connection
- 6.7 Error flow for serial connection
- 6.8 Cleaning flow for serial connection
- Appendix A: USB Specifications
- Appendix B: Introducing the Brother Developer Center
| Recognized languages: | English |
|---|---|
| Pages: | 110 |
| Size: | 2.32 MB |
Show table of contents
Document Outline
- P-touch Template 2.0 Command Reference RJ-4030/4040
- IMPORTANT - PLEASE READ CAREFULLY
- Contents
- Introduction
- What is P-touch Template 2.0?
- 1. Using P-touch Template 2.0
- 2. P-touch Template Settings Tool User’s Guide
- 3. Examples for Using Commands
- 4. P-touch Template 2.0 Limitations
- 5. Precautions
- 6. Control Code Lists
- 7. Control Command Details
- ^PT Select print start trigger
- ^FF Start printing
- ^PS Specify print start command text string
- ^PC Specify print start received character count
- ^SS Specify delimiter
- ^TS Select template
- ^CO Select printer settings (cut options)
- ^LS Specify line spacing with line feed
- ^CC Change the prefix character
- ^RC Specify line feed command text string
- ^CN Specify number of copies
- ^NN Specify number of Numbering copies
- ^ID Initialize template data
- ^QS Select print options
- ^QV Specify QR Code version
- ^FC FNC1 replacement setting
- ^II Initialize
- ^OP Perform printer operation (feed)
- ^SR Status request
- ^VR Retrieve version information
- ^CR Line feed in object
- ^OS Select object (object number)
- ^ON Select object (object name)
- ^DI Directly insert object
- ESC i a Select command mode
- ESC iXT2 Select print start trigger
- ESC iXP2 Specify print start command text string
- ESC iXr2 Specify print start received character count
- ESC iXD2 Specify delimiter
- ESC iXa2 Specify non-printed text strings
- ESC iXi2 Select command mode
- ESC iXn2 Select template
- ESC iXf2 Change the prefix character
- ESC iXc2 Select printer settings (cut options)
- ESC iXy2 Select printer settings (cut options–specifying number of labels)
- ESC iXm2 Select character code set
- ESC iXj2 Select international character set
- ESC iXR2 Specify line feed command text string
- ESC iXC2 Specify number of copies
- ESC iXN2 Specify number of Numbering copies
- ESC iXF2 FNC1 replacement setting
- ESC iXq2 Select print options
- ESC iXd2 Specify recovery setting
- ESC iXT1 Retrieve print start trigger setting
- ESC iXP1 Retrieve print start command setting text string
- ESC iXr1 Retrieve print start received character count
- ESC iXD1 Retrieve delimiter
- ESC iXa1 Retrieve non-printed text strings
- ESC iXi1 Retrieve command mode setting
- ESC iXn1 Retrieve number of selected template
- ESC iXc1 Retrieve printer settings (cut options)
- ESC iXy1 Retrieve printer settings (cut options–specifying number of labels)
- ESC iXm1 Retrieve character code set setting
- ESC iXj1 Retrieve international character set setting
- ESC iXf1 Retrieve prefix character
- ESC iXR1 Retrieve line feed command setting text string
- ESC iXC1 Retrieve number of copies setting
- ESC iXN1 Retrieve number of Numbering copies setting
- ESC iXF1 Retrieve FNC1 replacement setting
- ESC iXq1 Retrieve print options
- ESC iXd1 Retrieve recovery setting
- 8. ZPL II supported by RJ-4030/4040
- Appendix A: Specifications
- Appendix B: Character Code Tables
- Appendix C: Troubleshooting
- Appendix D: Introducing the Brother Developer Center
- brother US ENG
| Recognized languages: | English |
|---|---|
| Pages: | 116 |
| Size: | 1.14 MB |
Show table of contents
Document Outline
- ESC/P Command Reference RJ-4030/4040
- IMPORTANT - PLEASE READ CAREFULLY
- Contents
- Introduction
- What is ESC/P?
- 1. Using ESC/P Commands
- 2. Examples of Using ESC/P Commands
- 3. ESC/P Command Limitations
- 4. Control Code List
- 5. Control Command Details
- 5.1 Character/style selection commands
- 5.2 Text printing commands
- ESC 4 Apply italic style
- ESC 5 Cancel italic style
- ESC E Apply bold style
- ESC F Cancel bold style
- ESC G Apply double-strike printing
- ESC H Cancel double-strike printing
- ESC P Apply pica pitch (10 cpi)
- ESC M Apply elite pitch (12 cpi)
- ESC p Specify proportional characters
- ESC W Specify double-width characters
- SO Specify auto-canceling stretched characters
- ESC SO Specify auto-canceling stretched characters
- SI Specify compressed characters
- ESC SI Specify compressed characters
- DC2 Cancel compressed characters
- DC 4 Cancel auto-canceling double-width characters
- ESC – Apply/cancel underlining
- ESC ! Global formatting
- ESC SP Specify character spacing
- ESC X Specify character size
- 5.3 Line feed commands
- 5.4 Horizontal movement commands
- 5.5 Vertical movement commands
- 5.6 Paper formatting commands
- 5.7 Printer control commands
- 5.8 Graphics commands
- 5.9 Advanced commands
- ESC i B Barcode
- ESC i Q 2D barcode (QR Code)
- ESC i P QR Code version
- ESC i V 2D barcode (PDF417)
- ESC i D 2D barcode (DataMatrix)
- ESC i M 2D barcode (MaxiCode)
- ESC iG Specify font
- ESC i F Print downloaded data
- ESC i a Switch command mode
- ESC i S Status information request
- ESC i L Specify landscape orientation
- ESC i C Specify cutting
- 5.10 Advanced static commands
- ESC iXQ2 Select default character style
- ESC iXQ1 Retrieve default character style
- ESC iXk2 Select default font
- ESC iXk1 Retrieve default font
- ESC iXX2 Specify default character size
- ESC iXX1 Retrieve default character size
- ESC iX32 Specify default line feed
- ESC iX31 Retrieve default line feed
- ESC iXA2 Select default alignment
- ESC iXA1 Retrieve default alignment
- ESC iX(2 Specify default page length
- ESC iX(1 Retrieve default page length
- ESC iXL2 Select default landscape orientation
- ESC iXL1 Retrieve default landscape orientation
- ESC iXj2 Select default international character set
- ESC iXj1 Retrieve default international character set
- ESC iXm2 Select default character code set
- ESC iXm1 Retrieve default character code set
- ESC iXd2 Specify recovery setting
- ESC iXd1 Retrieve recovery setting
- Appendix A: Character Code Tables
- Appendix B: Introducing the Brother Developer Center
- brother US ENG
| Recognized languages: | English |
|---|---|
| Pages: | 41 |
| Size: | 2.85 MB |
Show table of contents
Document Outline
- SOFTWAREUSER’S GUIDE RuggedJet series
- Introduction
- Table of Contents
- 1 Installing and Uninstalling P-touch Editor Software and P-touch Update Software
- 2 How to Use P-touch Editor
- 3 How to use P-touch Transfer Manager & P-touch Library
- 4 Transferring label templates with P-touch Transfer Express
- Preparing P-touch Transfer Express
- Transferring the label template to P-touch Transfer Manager
- Saving the label template as a Transfer Package file (.pdz)
- Distributing the Transfer Package file (.pdz) and P-touch Transfer Express to the user
- Transferring the Transfer Package file (.pdz) to RJ-4030/RJ-4040
- 5 Updating P-touch Editor, Updating the Firmware
- 6 Printing labels distributed to multiple printers
- brother US ENG
| Recognized languages: | English |
|---|---|
| Pages: | 17 |
| Size: | 2.56 MB |
| Recognized languages: | English |
|---|---|
| Pages: | 62 |
| Size: | 7.96 MB |
Show table of contents
Document Outline
- USER’S GUIDE RJ-4030 RJ-4040
- Introduction
- Table of Contents
- 1 Setting Up the Printer
- General Description
- Connecting the Printer to External Power
- Using the Rechargeable Li-ion Battery (Optional)
- Inserting the RD Roll
- Attaching the Belt Clip
- Installing the Printer Driver and the Software for RJ-4030
- Installing the Printer Driver and the Software for RJ-4040
- Uninstalling the Printer Driver
- Connecting the Computer and Printer
- 2 Using the Printer
- 3 RJ Utility
- 4 Network Setting Tool (RJ-4040 only)
- 5 Other Functions
- 6 Maintaining the Printer
- 7 Reference
- 8 Troubleshooting
- 9 Technical Information
- brother US ENG
| Recognized languages: | English |
|---|---|
| Pages: | 1 |
| Size: | 3.23 MB |