Brother RJ-4040 - Manual (Page 42)

Chapter 4
38
Main Window
4
1 Menu Bar
Select the commands contained in each menu
from the list.
2 Printer
Selects the printer whose settings will be
changed.
If only one printer is connected, only that
printer is displayed and it is not necessary to
select a printer.
3 Node Name
Displays the node name. Node names can be
changed.
4 Applicable Settings
Displays setting items. Select the item that you
want to change the settings for.
5 Settings Display/Change Area
Displays the selected item’s current setting.
Change the settings as necessary using the
pull-down menu, direct entry, or other
methods.
6 Save Command Settings
Saves network settings in PJL command
format. The file extension is “.bin”.
By sending these commands to printers via
USB, network settings for printers can be
configured in the same way as when settings
are made using the Network Setting Tool (see
Mass Storage uu page 44).
7 Apply
Applies the settings to the printer.
By pressing this button you can apply all the
settings set on multiple windows at once.
8 Exit
Exits the Network Setting Tool.
3
5
7
6
8
1
2
4
Settings are not applied to printers if the
[Exit] button is clicked without clicking
the [Apply] button after changing
settings.