Brother RJ-4040 - Manual (Page 55)

Reference
51
7
Printing the Printer
Set-up Information
7
You can use the (Feed) button to print a
report that lists the following printer settings:
 Program version
 Printer usage history
 Missing dot test pattern
 RJ Utility setting information
 List of transferred data
 Network setting information
 Wi-Fi setting information
Note
• You can use the RJ Utility to set in
advance which items will be printed (see
Printer Information Output Settings
uu
page 32).
• The node name appears in the Printer
Settings. The default node name is
“BRWxxxxxxxxxxxx”. (“xxxxxxxxxxxx” is
based on your printer’s MAC
Address/Ethernet Address.)
a
Make sure that a roll of 4" (101.6 mm)
receipt paper has been loaded and the
RD Roll compartment cover is closed.
b
Turn on the printer.
c
Press and hold the (Feed) button until
the POWER indicator starts blinking in
green.
The settings will be printed.
Note
• To print the Printer Settings, we
recommend to use 4" (101.6 mm) receipt
paper.
• This operation can also be performed
using the RJ Utility (see Print Printer
Information uu page 35).