Wia compliant, Scanning a document into the pc, Scanning a document using the wia driver – Brother MFC-9325CW User Manual
Page 52: Windows, Xp/windows vista, Wia compliant scanning a document into the pc, Scanning a, Document using the wia driver (windows, Scanning a document using the wia driver (windows
Scanning
44
2
Scanning a document using the WIA driver
(Windows
®
XP/Windows Vista
®
/Windows
®
7)
2
WIA compliant
2
For Windows
®
XP/Windows Vista
®
/Windows
®
7 you can choose Windows
®
Image Acquisition (WIA) for
scanning images from the machine. You can scan images directly into the PaperPort™ 11SE viewer that
Brother included with your machine or you can scan images directly into any other application that supports
WIA or TWAIN scanning.
Scanning a document into the PC
2
There are two ways in which you can scan a whole page. You can either use the ADF (automatic document
feeder) or the scanner glass.
If you want to scan and then crop a portion of a page after pre-scanning the document, you need to use the
scanner glass. (See Pre-Scanning to crop a portion you want to scan using the scanner glass on page 46.)
a
Load your document.
b
Start the ScanSoft™ PaperPort™ 11SE software that was installed during the MFL-Pro Suite installation
to scan a document.
Note
The instructions for scanning in this Guide are for when you use ScanSoft™ PaperPort™ 11SE. The
scanning steps may vary when using other software applications.
c
Click File, then Scan or Get Photo.... You can also click the Scan or Get Photo button.
The Scan or Get Photo panel appears on the left side of the screen.
d
Click Select button.
e
Choose the scanner you are using from the Available Scanners list.
Note
Choose WIA: Brother MFC-XXXX or WIA: Brother MFC-XXXX LAN.
f
Check the Display scanner dialog box on the Scan or Get Photo panel.
g
Click Scan.
The Scanner Setup dialog box appears.