Brother MFC-9325CW User Manual
Page 135
Printing and Faxing
127
7
Color/Mono
You can change the Color/Mono settings as follows:
• Auto
The printer checks the content of your documents for color. If color is detected, it prints in color. If no
color content is detected, it prints in monochrome. The total printing speed may become slower.
• Color
When your document contains color and you want to print it in color, select this mode.
• Mono
Select this mode if your document has only black and grayscale text and/or objects. Mono mode makes
the print processing speed faster than color mode. If your document contains color, selecting Mono
mode prints your document in 256 levels of gray.
Note
If the Cyan, Magenta or Yellow toner reaches the end of its life, choosing Mono will allow you to keep
printing as long as the Black toner does not reach the end of its life.
Toner Save Mode
You can conserve toner use with this feature. When you set Toner Save Mode to On, print appears
lighter. The default setting is Off.
Note
We do not recommend Toner Save for printing Photo or Gray Scale images.
Reverse Print (Mac OS X 10.4.11 only)
Check Reverse Print to reverse the data from up to down.
Support (Mac OS X10.4.11 to 10.5.x)
You can visit the Brother Solutions Center () and our web site for
original/genuine Brother supplies by clicking the Support button. The Brother Solutions Center is a web
site offering information about your Brother product including FAQs (Frequently Asked Questions), User’s
Guides, driver updates and tips for using your printer.