Caution – Brother MFC-9325CW User Manual
Page 198
Scanning (For USB cable users)
190
11
d
Press a or b to choose Scan to USB.
Press OK.
e
Choose one of the options below:
To change the setting press a or b to choose Change Setting. Press OK and go to step f.
To start scanning with the settings you set in the Function Menu (Menu, 5, 2), choose Start Scan.
Press OK and go to step i.
f
Press a or b to choose the quality you want.
Press OK.
g
Press a or b to choose the file type you want.
Press OK.
Note
• If you choose color or Gray in the resolution setting, you cannot choose TIFF.
• If you choose black & white in the resolution setting, you cannot choose JPEG or XPS.
• If you choose Secure PDF, the machine will ask you to enter a 4 digit password using numbers 1-9 before
it starts scanning.
h
The file name is set automatically. However, you can create a name of your choice using the dial pad.
You can only change the first 6 digits of the file name.
Press OK.
Note
Press Clear/Back to delete the letters you entered.
i
Press Black Start or Color Start to start scanning.
Note
Scan type depends on the settings of the DeviceButton tab, Black Start or Color Start do not change the
settings.
CAUTION
The LCD shows Scanning while reading the data. DO NOT unplug the power cord or remove the USB
Flash memory drive from the machine while it is reading the data. You could lose your data or damage the
USB Flash memory drive.