Scan to image – Brother MFC-9325CW User Manual

Page 210

Network Scanning

202

Note

• Scan type depends on the settings of the DeviceButton tab, Black Start or Color Start do not change the

settings.

• If you want the scanned data incolor, choose color in scan type on the Device Button tab of the

ControlCenter3 or ControlCenter2 configuration. If you want the scanned data in black and white, choose
black and white in scan type on the Device Button tab of the ControlCenter3 or ControlCenter2
configuration.

• If you want to change the default file size, choose your preferred rate by moving the scroll bar on the

Device Button tab of the ControlCenter3 or ControlCenter2 configuration.

Scan to Image

When you choose Scan to Image, your document will be scanned and sent directly to the computer you
designated on your network. ControlCenter3 or ControlCenter2 will activate the default graphics application
on the designated computer. You can change the Scan configuration. (For Windows

Wee E-mail

on page 65. For Macintosh, see SCAN on page 170.)

Load your document.

Press (SCAN).

Press a or b to choose Scan to PC.
Press OK.

Press a or b to choose Image.
Press OK.

Press a or b to choose the destination computer you want to send to.
Press OK.
If the LCD prompts you to enter a PIN number, enter the 4-digit PIN number for the destination computer
on the control panel.
Press OK.

Press Black Start or Color Start.
The machine starts the scanning process.

Note

• Scan type depends on the settings of the DeviceButton tab, Black Start or Color Start do not change the

settings.

• If you want the scanned data in color, choose color in scan type on the Device Button tab of the

• If you want to change the default file size, choose your preferred rate by moving the scroll bar on the

Device Button tab of the ControlCenter3 or ControlCenter2 configuration.

This manual is related to the following products:

MFC-9125CN